|
Part No. CG4815BW
Product Manufacturer Coverguard
Product Group SXXXTVPE
Ein klassisches "Bubble Wrap" Produkt, also Luftpolsterfolie. Bubble
Wrap Coverguard wird wegen umfassender Klassifizierung und flammhemmende
Charakteristik von unseren Kunden gerne eingesetzt.
- Besonders zuverlässiger Schutz
- Wiederverwendbar
- Materialdicke 4.8mm
- Rollenbreite 1.50m
- Rollenlänge 100m
Bubblewrap Coverguard ist wiederverwendbar. Das macht es längerfristig
besonders wirtschaftlich. Es ist von allen Klassifikationsgesellschaften
anerkannt, siehe auch unter Coverguard Präsentationen.
General Applications
Wrapping and covering objects to protect them in situations is often the
only option available and if done properly can be a very cost effective
solution. Bubble-wrap cover guard can be used to shroud items requiring
protection from airborne particles, light impact and during storage or
transportation of equipment.
Part Number(s)
CG4815BW - Bubble-wrap
CG48153BW - Tri-Wall Bubble-wrap
Description
Temporary FR Bubble-wrap
Material
Flame retardant low density polyethylene nylon barrier layer closed cell film (extruded construction)
Bubble Height
4.8mm and 12.5mm
Weight per M2
80 grams per m2
Colour
White, printed with cover guard® ocean blue
Finish
CG4815BW: One surface flat the other bubble cushioning. CG48153BW: Both sides flat with a bubble centre.
Bundle Widths
1.50m
Bundle Length
100m
Bundle Area
150m2
Bundle Weight
12 kilos
Bundle Diameter
660mm
Testing Body
BRE Testing
LPS 1207
Selected samples from the Coverguard range of temporary protective
coverings have been subjected to a series of tests utilising the test
methodology contained in LPS 1207: Issue 2:2003 by BRE.
Report No: 219791 Date: 16.11.04
Satisfies LPS 1207
Small flame test to BS 476, Part 12 1991
Large flame test to BS 5852, crib no. 7
Smoke emission EN2825
Toxic Gas emission EN2826
Oxygen index BS2782
(Part 1 method 141 1986)
(ISO 4589-1984)
The test report does not imply approval or certification and the test
results only relate to the items tested and not necessarily to the
product brought to market
Certification
Full test report available upon request.
bubble-wrap cover guard was specifically designed and developed in
partnership with Devonport Management Limited for use on board Royal
Navy vessels, luxury yachts and turnkey projects aimed at protecting a
wide range of finishes.
bubble-wrap cover guard is manufactured from a low density polyethylene
flame retardant, nylon barrier layer closed cell film, being of extruded
construction. One side is flat and smooth the other a 3/4 inch diameter
air filled cushioning bubble.
Apart from being tested and approved at the Warrington Fire Research
Centre (London) Ltd, the material also meets the approval for use on
board nuclear submarines, by reducing the amount of chlorides and
halogens to acceptable levels.
bubble-wrap cover guard protects all types of finished surfaces and is
used for the packing, wrapping, and covering of equipment, furnishings,
pillars, bulkheads, wall panelling systems and machinery, to protect
against damage from activity, dirt, dust, debris, spillage and paint
over-spray. The system is very quick, efficient and simple to use,
assuring you the customer against damage and soiling of finished
surfaces and objects. Produced in 5 feet widths available from stock, it
is extremely light and easy to manage. Fitting is very simple and aided
with the use of tape cover guard.
This product is manufactured to the highest levels of quality, service
and safety, being fully mil-traceable and continuously re-tested for
flame retardancy, smoke and toxicity to reduce the risk of fire.
|
