|
Part No. CG0515FM
Product Manufacturer Coverguard
Product Group SXXXTVPE
Foam-Impact Coverguard ist ein geschlossenporiges Schaummaterial, das
besten Schutz auch bei besonderen Beanspruchungen wie Schlδgen gegen
die Oberflδche gibt.
- Besonders zuverlδssiger Schutz
- Wiederverwendbar
- Materialdicke 5mm
- Rollenbreite 1.50m
- Rollenlδnge 75m
Impact-Foam Coverguard ist wiederverwendbar, das macht es besonders
wirtschaftlich. Es ist von allen Klassifikationsgesellschaften
anerkannt.
General Applications
Manufactured from a blend of low-density polyethylene flame retardant
foam, ultraviolet, anti static and pigment additives, impact cover guard
is an extruded microcellular construction to give maximum impact
resistance. This product is extremely durable, tough, cushions and
absorbs shock, offering total protection against impact, indentation,
marking, most chemicals, paint over-spray etc during the outfitting
stages.
Part Number(s)
CG0515FM
Material
Flame Retardant Polyethylene Foam
Material Thickness
5mm
Colour
cover guard® ocean blue
Finish
Polyethylene foam with its micro-cellular construction designed to absorb and provide high performance cuhioning
Fixing Mechanism
Self wrapping of large areas or fixable with adhesive tape such as the tape cover guard system
Roll Widths
1.5 m
Roll Length
75 m
Roll Coverage
113 m2
Roll Weight
16 kg
Roll Diameter
600 mm
Testing Body
BRE Testing
Selected samples from the Coverguard range of temporary protective
coverings have been subjected to a series of tests utilising the test
methodology contained in LPS 1207: Issue 2:2003 by BRE.
Report No. 218077 Rev 1 Date: 28.07.04
Satisifies LPS 1207
Small flame test to BS 476, Part 12 1991
Large flame test to BS 5852, crib no. 7
Smoke emission EN2825
Toxic Gas emission EN2826
Oxygen index BS2782,
(Part 1 method 141 1986)
(ISO 4589-1984)
The test report does not imply approval or certification and the test
results only relate to the items tested and not necessarily to the
product brought to market
Warrington Fire Research
IMO resolution A.471 (XII)
as amended by resolution
IMO res.A652 (14).
WARRES No: 302365 Date: 05.07.01
A653 floor covering,
bulkheads & ceilings
A563-14 (superseded A471)
vertical flame test textiles
General Approvals
Lloyds Register of Shipping
Det Norske Veritas
Germanischer Lloyd
Bureau Veritas
Offshore Certification Bureau Ltd
Marine Safety Agency
Ministry of Defence DNES
Marine Safety Agency (DTI)
Certification
Full test report available upon request.
Manufactured from a blend of low-density polyethylene flame
retardant foam, ultraviolet, anti static and pigment additives, impact
cover guard is an extruded micro-cellular construction to give maximum
impact resistance. Being available in practical and manageable widths
for use in the vertical situation and secured with our range of tape
cover guard products.
Protection and grade selection is dependant upon length of time versus
workman activity taking place in the immediate area, applications range
from protecting such finishes as wood, teak, veneer, glass, steel,
marble etc, during the outfitting stages.
This product is extremely durable, tough, cushions and absorbs shock
offering total protection against impact, indentation, marking, knocks,
scuffs, most chemicals, paint over-spray, dirt, dust, debris hence
reducing the possibility of damage to expensive finishes. The impact
cover guard range is manufactured to the highest levels of quality,
service and safety being fully mil-traceable being continuously
re-tested for flame retardancy, smoke and toxicity to reduce the risk of
fire.
These products are compact, lightweight and manageable allowing access
and work to take place in confined spaces and storage space is kept to a
minimum. This range is available ex-stock, custom widths, finishes and
colour options are available on request.
|
